AUTOTRIP Residual Current Device Tester and Earth Leakage Circuit Breaker Tester
The New EFO AUTOTRIP RCD Tester is a powerful and comprehensive RCD Tester with unique time saving testing capabilities not found in other RCD Testers in the Market.The AUTOTEST RCD Tester can be used for testing RCDs at the socket outlet or directly from the switchboard using the Accessory test leads.
Faster RCD Operation Testing
To reduce RCD testing time the new EFO AUTOTRIP has two automatic test sequence functions Quick Auto (2 Tests): 30mA x1 at 00 & 1800 and Full Auto (6 Tests): 30mA x½, x1, x5 at 00 & 1800 which allows the operator to set the test to run, resetting the RCD at the distribution board during the test cycle then returning to the instrument to recall the trip time results. Additional design features include a hands free function for rapid repeat RCD testing at distribution boards, Pass/Fail results, diagnostic ramp test (mA) and mains polarity.
Supply Voltage Range 195 to 253V AC 50-60Hz
Nominal Currents 10mA,30mA,100mA
Test Current Accuracy x 1/2 +0% - 10%
Test Current Accuracy x 1 +10% -0%
Test Current Accuracy x 5 (30mA only) +/- 5%
Test Current Accuracy Ramp +/- 5% of rated IN
Trip Time Accuracy to 1.999s +/- (1% +1ms)
Fault / Touch Voltage 50V
Over Voltage Protection 440V
Measurement Range 5ms – 1999ms
Operating Range Per EN61557 38ms – 1999ms
The AUTOTRIP RCD Tester complies fully with the requirements of EN61010 and complies with the sections of EN61557
Electrical Safety in Low Voltage Systems up to 1000V AC and 1500V DC as listed below.
EN 61010-2-030:2010 300V CATIII (Safety)
EN 61326-2-2:2013 (EMC)
EN 61557-1:2007 (General performance)
EN 61557-6:2007 (RCD performance)
Soft Carry Case
Test lead 4mm banana plugs to 3 pin main plug
Part No TL-30 Distribution board Lead Set as pictured below.